Swagath Urethane Private Limited
Rangareddy, Telangana
GST No. 36AAKCS1818H1Z9
Call 08046042889 83% Response Rate
Send Enquiry
Centrifugal Oil Separator
Manufacturer of a wide range of products which include centrifugal oil separator and ms oil separator.
Centrifugal Oil Separator
Get Best Quote
Rs 1,00,000 / PiecePrice on Request
| Material | Polyurethane and Mild Steel |
| Model Name/Number | ORI-CS |
| Brand | Orithane |
| Voltage | 240V |
| Frequency | 50 Hz |
| Phase Type | 3 Phase |
| Country of Origin | Made in India |
- In pulp and paper mills to remove sand, staples, plastic particles and other contaminants.
- In the drilling industry to separate sand from the expensive clay that is used for lubrication during the drilling.
- In industry to separate oil from water or vice versa.
- In metal working to separate metal particles from cooling liquid.
- In potato processing plants to recover starch from waste water.
- In mineral processing, hydrocyclones are used extensively both to classify particles for recirculation in grinding circuits and to differentiate between the economic mineral and gangue.
- To remove sand and silt particles from irrigation water for drip irrigation purposes.
- Cyclonic separation is a method of removing particulates from an air, gas or liquid stream, without the use of filters, through vortex separation. Rotational Effects and gravity are used to separate mixtures of solids and fluids. The method can also be used to separate fine droplets of liquid from a gaseous stream.
- A high speed rotating (air)flow is established within a cylindrical or conical container called a cyclone. Air flows in a helical pattern, beginning at the top (wide end) of the cyclone and ending at the bottom (narrow) end before exiting the cyclone in a straight stream through the center of the cyclone and out the top. Larger (denser) particles in the rotating stream have too much inertia to follow the tight curve of the stream, and strike the outside wall, then falling to the bottom of the cyclone where they can be removed. In a conical system, as the rotating flow moves towards the narrow end of the cyclone, the rotational radius of the stream is reduced, thus separating smaller and smaller particles. The cyclone geometry, together with flow rate, defines the cut point of the cyclone. This is the size of particle that will be removed from the stream with a 50% efficiency. Particles larger than the cut point will be removed with a greater efficiency, and smaller particles with a lower efficiency.
- An alternative cyclone design uses a secondary air flow within the cyclone to keep the collected particles from striking the walls, to protect them from abrasion. The primary air flow containing the particulates enters from the bottom of the cyclone and is forced into spiral rotation by stationary spinner vanes. The secondary air flow enters from the top of the cyclone and moves downward toward the bottom, intercepting the particulate from the primary air. The secondary air flow also allows the collector to optionally be mounted horizontally, because it pushes the particulate toward the collection area, and does not rely solely on gravity to perform this function.
View Complete details
Yes! I am Interested
Request a call back
MS Oil Separator
Get Best Quote
Rs 1,00,000 / PiecePrice on Request
Product Brochure
| Usage | Mineral Processing Industry |
| Material | Mild Steel |
| Brand | Swagath |
| Dust Removal Efficiency (%) | 70% |
| Voltage (V) | 220V |
| Country of Origin | Made in India |
- Cater to the mineral industry
- Have a high wear life
- Highly reliable
- Can be availed at compatible costs
- Applicable for various circulations
View Complete details
Yes! I am Interested
Request a call back
EXPLORE MORE CATEGORIES